Chimney Inspection in Chico, CA | Chimney Sweep Chico

Chimney Inspection in Chico - Flat-Price Sweep, Findings in Writing

A flat-price sweep with a camera inspection and photo report included. If we find something that needs attention, you see the picture before you hear a price - and we will tell you when it can wait.

Flat price quoted before we book

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Trusted Chimney Inspection for Chico Homeowners

A chimney can look fine from the living room and still be hiding cracked flue tile, a failed cap, or a creosote layer thick enough to catch. That gap between appearance and reality is the whole reason a documented inspection matters. Our technicians have up to 8 years of experience, and they work from a written checklist so you get findings you can actually read, photograph by photograph, not a verbal thumbs-up on the way out the door. We handle chimney sweeping, chimney repair, and chimney inspection as one job, so when the inspection turns up something, the fix doesn’t require hunting for a second contractor. In Chico, plenty of homes still burn wood as a real heat source through the cooler months, and the time to know what shape the flue is in is before the first fire, not after. Call (844) 320-4731 to book an inspection.

Call (844) 320-4731

Fireplace Inspection

Fireplace Inspection is the focused look at the firebox, damper, smoke chamber, and the first stretch of flue directly above the fire, the parts a fire actually touches hardest. You need one when you’ve moved into a home with a fireplace you’ve never burned, when the fireplace has sat unused for a season or more, or when smoke has started curling into the room instead of going up. Chimney Sweep Chico inspects the firebox for cracked brick and loose mortar joints, checks that the damper opens, closes, and seats correctly, and confirms the smoke chamber isn’t coated in glazed creosote that can ignite. A fireplace inspection in Chico typically runs $125-$275 depending on how much of the firebox and smoke chamber needs close examination. You leave with photos of what we found and a written summary, and nothing gets recommended that the photos don’t back up.

Firebox and Damper Checks

The firebox takes the direct heat, so brick spalling and mortar erosion show up there first. We probe joints and check the damper for a tight seat, since a damper that won’t close lets heated room air escape up the flue all year. Anything found is documented before we discuss repair.

Smoke Chamber and Smoke Draw

A smoke chamber with rough, corbeled surfaces collects creosote quickly and can stall draft. We look at the chamber walls and the smoke shelf for buildup and for the geometry problems that push smoke back into the room. It’s a common reason a fireplace that “always worked” suddenly starts smoking.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Inspection Services

Chimney Inspection Services cover the whole venting system, from the cap on the roof down to the appliance connection, and they’re what you book when you want a complete picture rather than one part looked at. You need them before a first burning season in a new home, after any chimney fire, after a seismic event or a windstorm that moved something on the roof, and on a regular schedule if you burn steadily through the winter. Chimney Sweep Chico works all three levels of inspection and tells you up front which one your situation calls for. We inspect the cap, crown, flashing, flue, and firebox, and we photograph what we see. Chimney inspection services in Chico typically run $150-$400 depending on the level and access. The report is written, so it holds up for insurance, a real estate transaction, or your own records.

Exterior and Roof-Level Review

We check the crown for cracks, the flashing where the chimney meets the roof, and the cap for a loose or missing fit. Fitted cap and cover installations use Gelco and Famco systems, so exclusion work is a real product, not bent sheet metal. Masonry and flashing findings go into the report with photos.

Exterior and Roof-Level Review

Interior Venting Review

Inside, we look at the firebox, damper, smoke chamber, and the flue itself, checking joints and clearances to combustible material. Anything that would stop a safe burn gets flagged in plain language. You’ll know what’s urgent and what can wait.

Interior Venting Review
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (844) 320-4731

Chimney Flue Inspection

Chimney Flue Inspection is the direct examination of the flue, the vertical channel that carries smoke and carbon monoxide out of the house, and it’s the part of the system most often damaged without anyone noticing. You need one whenever there’s been a chimney fire, whenever you’ve switched fuels or appliances, when a liner’s age is unknown, or when the flue hasn’t been looked at in years. Chimney Sweep Chico inspects the flue for cracked or missing tile, gaps at the joints, misaligned sections, and excessive creosote, and we use video to see what the eye can’t reach. A flue inspection in Chico typically runs $150-$350 depending on access and whether video is needed. Because we also install DuraFlex flexible liner systems and resurface with HeatShield, a flue finding doesn’t dead-end at “you need a liner.” We can usually restore or reline the flue rather than tell you to start over.

Flue Tile and Joint Condition

Cracked tile and open joints let heat and gases reach framing and masonry that were never meant to take them. We map every defect by location so the report shows exactly where the problem sits. Small joint gaps can sometimes be resurfaced with HeatShield instead of a full tear-out.

Creosote and Clearance Assessment

We grade creosote buildup and check clearances between the flue and nearby combustibles. Glazed, tar-like creosote is the kind that fuels chimney fires and needs more than a brush. Clearance problems get flagged as safety items, not upsells.

Chimney Fire

Chimney Fire damage is easy to underestimate, because the fire itself often goes out on its own and the chimney keeps working, which is exactly what makes it dangerous. You need an inspection after any chimney fire, even a small one you think you caught early, and especially if you heard a low rumble or a pop and saw flames or sparks at the top. A chimney fire can crack flue tile, warp a metal liner, and deposit glazed creosote that’s ready to burn again. Chimney Sweep Chico inspects the full flue with video after a fire to find cracks, gaps, and heat damage that aren’t visible from below. Post-fire inspection and assessment in Chico typically runs $200-$450 depending on access and the extent of what’s found. If the flue needs work, we repair to manufacturer specification using named products, and you get the documentation for your insurer. Safety first: don’t burn again until the flue has been checked and cleared by a trained professional.

Post-Fire Damage Signs

Look for cracked tile, a puffy or “honeycombed” creosote layer, discolored caps, and a warped damper. Any of these after a fire means the flue needs a close look before the next burn. We verify with video rather than guess.

Why a Small Fire Still Matters

Even a brief fire can open a joint or hairline-crack a tile, and that gap lets carbon monoxide into the house instead of up the stack. Damage doesn’t announce itself. An inspection confirms whether the flue is still sound.

Level 2 Chimney Inspection

Level 2 Chimney Inspection is the thorough, camera-based inspection that goes beyond what you can see from the firebox, and it’s the level most real estate transactions, insurance reviews, and post-fire situations call for. You need one when a property changes hands, after a chimney fire or a seismic event, when you’ve changed the appliance or fuel type, or when a Level 1 turn-up reveals something that needs a closer look. Chimney Sweep Chico performs the full Level 2: accessible attic and crawl space review, exterior and roof-level check, and a video scan of the entire flue. A Level 2 inspection in Chico typically runs $250-$450 depending on the home’s layout, roof access, and how much of the flue needs video coverage. Everything is photographed and written up, and we tell you plainly what’s urgent, what’s routine, and what can safely wait.

What the Video Scan Covers

The camera travels the full length of the flue, showing tile joints, cracks, offsets, and creosote in real time. We record it so you can watch the same footage we did. Nothing in the report is based on a guess.

Attic and Crawl Space Access

We look at the chimney where it passes through the attic and any enclosed space, checking clearances to framing and insulation. Those clearances are a common hidden problem in older homes. Findings are documented with measurements where they matter.

Chimney Leak

Chimney Leak problems almost always start at the top, at the crown, the flashing, or the cap, and water rarely comes from where the stain on the ceiling suggests. You need an inspection when you see damp masonry, a musty smell near the fireplace, rust on the damper, or water staining on the ceiling or chimney breast, and after any major storm. Chimney Sweep Chico traces the leak to its actual source rather than sealing the first suspect, checking the crown for cracks, the flashing where the chimney meets the roof, the cap fit, and the flue for water entry. We fit proper caps and covers using Gelco and Famco systems when the cap is the culprit, so the fix is a fitted product, not caulk. A chimney leak inspection in Chico typically runs $150-$350 depending on access. You’ll see the photos of what’s failing and get a written plan before any sealing or repair begins.

Tracing the Water Source

Stains lie; the roof line and the crown usually tell the truth. We check flashing, crown condition, and cap fit in that order, since those three cause most leaks. The source gets photographed before we recommend anything.

Caps, Covers, and Exclusion

A missing or loose cap lets rain straight down the flue and animals set up house. We install fitted Gelco and Famco caps sized to the flue rather than a universal cover. Exclusion done properly keeps water and wildlife out for years.

Chimney Camera Inspection

Chimney Camera Inspection uses a video scope to look the full length of the flue, and it’s the only way to see cracks, gaps, offsets, and creosote that are hidden behind the firebox wall. You need one whenever the flue’s condition is unknown, after a chimney fire, as part of a Level 2 inspection, or whenever you’re being told a liner or repair is needed and want proof. Chimney Sweep Chico runs the camera, records the footage, and walks you through it so you can see the same defects we do. This is the answer to the real hesitation most homeowners have: nobody should be told they need thousands of dollars of work they can’t verify. A camera inspection in Chico typically runs $175-$350 depending on flue length and access. If something can safely wait, we say so, and the footage is yours to keep.

How the Video Scan Works

A camera on a flexible rod travels the flue while we watch a live feed and record it. The technician calls out defects by location as the camera passes. You get the recording and a written summary tied to what it shows.

When the Camera Is Essential

Offset flues, older masonry chimneys, and any post-fire situation are where the camera earns its keep. Rigid-liner-only outfits often can’t serve those flues properly. We can, using DuraFlex flexible systems where the fit calls for it.

Brands We Service

We work with a curated roster of professional-grade chimney brands, and that matters because a named product carries manufacturer specs and a documented material trail. We install and service HeatShield for flue resurfacing, restoring damaged tile without a full liner tear-out, a repair option most general sweeps simply can’t offer. We work with DuraFlex flexible liner systems for offset and hard-to-reach flues that rigid liners handle poorly. We fit Gelco and Famco cap systems for weather and animal exclusion, and we work with Olympia Chimney and Copperfield components where the installation calls for them.

Knowing where a given brand’s parts wear and how its systems are specified is what separates a proper repair from a workaround. We tie every repair back to the product’s own specifications, so you have names and documentable materials for your records and for your insurer. Whether you have HeatShield-resurfaced tile, a DuraFlex liner, a Gelco or Famco cap, Olympia Chimney or Copperfield components, or any other make, we can help.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Signs You Need a Pro Right Now

  • Smoke rolling back into the room. A fireplace that smokes when it used to draw well usually points to a blockage, a damaged flue, or a smoke chamber problem. It won’t fix itself, and burning through it can make the damage worse.
  • A strong, acrid smell even when you’re not burning. That odor often means creosote buildup or a draft pulling from a dirty flue. It’s a signal to get the chimney looked at before the next fire.
  • Water stains or damp masonry near the chimney. Moisture means a leak at the crown, flashing, or cap, and water plus masonry plus time equals expensive repair. Get it traced to the source.
  • You heard a rumble, pop, or roar from the chimney. That’s the sound of a chimney fire, even if it went out on its own. The flue needs a close check before you burn again.
  • Cracked or crumbling mortar in the firebox. Loose joints and spalled brick can let heat reach framing. This is a stop-and-inspect condition, not a wait-and-see one.

Our Process, Step by Step

  1. 1
    Book and scope the visit. We ask about the fireplace or stove, how much you burn, and any symptoms you’ve noticed, then recommend the right inspection level. You know what we’re doing and why before we start.
  2. 2
    Inspect the accessible exterior and roof level. We check the crown, flashing, cap, and masonry from the roof, photographing anything that’s failing. This is where most leak and exclusion problems get caught early.
  3. 3
    Inspect the interior and firebox. Firebox, damper, smoke chamber, and the flue connection all get a close look. We probe joints and check clearances rather than eyeball them.
  4. 4
    Run the video scan. The camera travels the full flue while we record, mapping cracks, gaps, offsets, and creosote by location. You see the same footage and get the recording.
  5. 5
    Write it up and walk you through it. You leave with a written report and photos, sorted into what’s urgent, what’s routine, and what can safely wait. If repair is needed, we quote it to manufacturer spec, and the written estimate sets the final price.

How Much Does Chimney Inspection Cost in Chico?

Chimney inspection in Chico typically runs $125-$450 depending on the level and the home. A basic fireplace inspection usually lands at $125-$275, a standard flue inspection runs $150-$350, and a full Level 2 with video coverage runs $250-$450. A camera scan on its own typically runs $175-$350. Post-fire assessment, which usually includes video and a closer look at heat damage, runs about $200-$450. There’s no service-call fee; the estimate is free and the written estimate sets the final price.

What moves the number: the inspection level, roof access and pitch, whether the flue is offset or hard to reach, how much video coverage the flue needs, and whether we’re also sweeping. A straightforward single-flue masonry chimney on an easy roof sits at the low end. A tall flue, an offset, or a home that needs attic and crawl space review sits higher.

How to avoid overpaying: ask up front which level you’re getting and why, and ask whether the inspection includes video and a written report. Skip anyone who quotes a big liner or masonry job before the camera has even run. Nothing gets recommended here without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait. A free estimate means you know the price before we start. Call (844) 320-4731 for an exact quote on your Chico chimney.

Our Service Area Near Chico

We inspect chimneys across Chico and the surrounding towns, including Durham and Paradise, plus Magalia, Orland, Thermalito, Corning, Oroville, South Oroville, and Kelly Ridge. Dispatch runs 7am to 7pm, Sunday through Friday, and we book each visit to the home’s access and layout so the technician arrives ready to work. Whether you’re near downtown Chico or out toward Durham and Paradise, call and we’ll find a time. If you’re not sure which inspection you need, our chimney sweep Chico team can help you sort it out.

Serving Chico, CA – Our Local Coverage Area

We serve Chico and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions About Chimney Inspection in Chico

Schedule Your Chimney Inspection Service in Chico Today

Don’t head into the burning season guessing at the shape of your flue. Book a chimney inspection in Chico and get a written, photo-backed report before the first fire, with repair quoted to manufacturer spec if anything needs it and a clear word on what can safely wait. Call (844) 320-4731 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Written by the team at Chimney Sweep Chico.

Why Chico Chooses Chimney Sweep Chico

We set the standard for chimney inspection in Chico.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Chico

Getting your chimney inspection handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney inspection needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney inspection pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Chico Customers Say

Trusted by homeowners across Chico and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Claudia Martinez
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Jodi Walsh
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Amit Rao

Ready for Chimney Inspection in Chico?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Chico.

(844) 320-4731

Request a Free Estimate in Chico

Tell us about your chimney inspection needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7