Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Chico Homeowners
A chimney can look fine from the living room and still be hiding cracked flue tile, a failed cap, or a creosote layer thick enough to catch. That gap between appearance and reality is the whole reason a documented inspection matters. Our technicians have up to 8 years of experience, and they work from a written checklist so you get findings you can actually read, photograph by photograph, not a verbal thumbs-up on the way out the door. We handle chimney sweeping, chimney repair, and chimney inspection as one job, so when the inspection turns up something, the fix doesn’t require hunting for a second contractor. In Chico, plenty of homes still burn wood as a real heat source through the cooler months, and the time to know what shape the flue is in is before the first fire, not after. Call (844) 320-4731 to book an inspection.
Fireplace Inspection
Fireplace Inspection is the focused look at the firebox, damper, smoke chamber, and the first stretch of flue directly above the fire, the parts a fire actually touches hardest. You need one when you’ve moved into a home with a fireplace you’ve never burned, when the fireplace has sat unused for a season or more, or when smoke has started curling into the room instead of going up. Chimney Sweep Chico inspects the firebox for cracked brick and loose mortar joints, checks that the damper opens, closes, and seats correctly, and confirms the smoke chamber isn’t coated in glazed creosote that can ignite. A fireplace inspection in Chico typically runs $125-$275 depending on how much of the firebox and smoke chamber needs close examination. You leave with photos of what we found and a written summary, and nothing gets recommended that the photos don’t back up.
Firebox and Damper Checks
The firebox takes the direct heat, so brick spalling and mortar erosion show up there first. We probe joints and check the damper for a tight seat, since a damper that won’t close lets heated room air escape up the flue all year. Anything found is documented before we discuss repair.
Smoke Chamber and Smoke Draw
A smoke chamber with rough, corbeled surfaces collects creosote quickly and can stall draft. We look at the chamber walls and the smoke shelf for buildup and for the geometry problems that push smoke back into the room. It’s a common reason a fireplace that “always worked” suddenly starts smoking.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney Inspection Services cover the whole venting system, from the cap on the roof down to the appliance connection, and they’re what you book when you want a complete picture rather than one part looked at. You need them before a first burning season in a new home, after any chimney fire, after a seismic event or a windstorm that moved something on the roof, and on a regular schedule if you burn steadily through the winter. Chimney Sweep Chico works all three levels of inspection and tells you up front which one your situation calls for. We inspect the cap, crown, flashing, flue, and firebox, and we photograph what we see. Chimney inspection services in Chico typically run $150-$400 depending on the level and access. The report is written, so it holds up for insurance, a real estate transaction, or your own records.
Exterior and Roof-Level Review
We check the crown for cracks, the flashing where the chimney meets the roof, and the cap for a loose or missing fit. Fitted cap and cover installations use Gelco and Famco systems, so exclusion work is a real product, not bent sheet metal. Masonry and flashing findings go into the report with photos.

Interior Venting Review
Inside, we look at the firebox, damper, smoke chamber, and the flue itself, checking joints and clearances to combustible material. Anything that would stop a safe burn gets flagged in plain language. You’ll know what’s urgent and what can wait.

Chimney Flue Inspection
Chimney Flue Inspection is the direct examination of the flue, the vertical channel that carries smoke and carbon monoxide out of the house, and it’s the part of the system most often damaged without anyone noticing. You need one whenever there’s been a chimney fire, whenever you’ve switched fuels or appliances, when a liner’s age is unknown, or when the flue hasn’t been looked at in years. Chimney Sweep Chico inspects the flue for cracked or missing tile, gaps at the joints, misaligned sections, and excessive creosote, and we use video to see what the eye can’t reach. A flue inspection in Chico typically runs $150-$350 depending on access and whether video is needed. Because we also install DuraFlex flexible liner systems and resurface with HeatShield, a flue finding doesn’t dead-end at “you need a liner.” We can usually restore or reline the flue rather than tell you to start over.
Flue Tile and Joint Condition
Cracked tile and open joints let heat and gases reach framing and masonry that were never meant to take them. We map every defect by location so the report shows exactly where the problem sits. Small joint gaps can sometimes be resurfaced with HeatShield instead of a full tear-out.
Creosote and Clearance Assessment
We grade creosote buildup and check clearances between the flue and nearby combustibles. Glazed, tar-like creosote is the kind that fuels chimney fires and needs more than a brush. Clearance problems get flagged as safety items, not upsells.
Chimney Fire
Chimney Fire damage is easy to underestimate, because the fire itself often goes out on its own and the chimney keeps working, which is exactly what makes it dangerous. You need an inspection after any chimney fire, even a small one you think you caught early, and especially if you heard a low rumble or a pop and saw flames or sparks at the top. A chimney fire can crack flue tile, warp a metal liner, and deposit glazed creosote that’s ready to burn again. Chimney Sweep Chico inspects the full flue with video after a fire to find cracks, gaps, and heat damage that aren’t visible from below. Post-fire inspection and assessment in Chico typically runs $200-$450 depending on access and the extent of what’s found. If the flue needs work, we repair to manufacturer specification using named products, and you get the documentation for your insurer. Safety first: don’t burn again until the flue has been checked and cleared by a trained professional.
Post-Fire Damage Signs
Look for cracked tile, a puffy or “honeycombed” creosote layer, discolored caps, and a warped damper. Any of these after a fire means the flue needs a close look before the next burn. We verify with video rather than guess.
Why a Small Fire Still Matters
Even a brief fire can open a joint or hairline-crack a tile, and that gap lets carbon monoxide into the house instead of up the stack. Damage doesn’t announce itself. An inspection confirms whether the flue is still sound.
Level 2 Chimney Inspection
Level 2 Chimney Inspection is the thorough, camera-based inspection that goes beyond what you can see from the firebox, and it’s the level most real estate transactions, insurance reviews, and post-fire situations call for. You need one when a property changes hands, after a chimney fire or a seismic event, when you’ve changed the appliance or fuel type, or when a Level 1 turn-up reveals something that needs a closer look. Chimney Sweep Chico performs the full Level 2: accessible attic and crawl space review, exterior and roof-level check, and a video scan of the entire flue. A Level 2 inspection in Chico typically runs $250-$450 depending on the home’s layout, roof access, and how much of the flue needs video coverage. Everything is photographed and written up, and we tell you plainly what’s urgent, what’s routine, and what can safely wait.
What the Video Scan Covers
The camera travels the full length of the flue, showing tile joints, cracks, offsets, and creosote in real time. We record it so you can watch the same footage we did. Nothing in the report is based on a guess.
Attic and Crawl Space Access
We look at the chimney where it passes through the attic and any enclosed space, checking clearances to framing and insulation. Those clearances are a common hidden problem in older homes. Findings are documented with measurements where they matter.
Chimney Leak
Chimney Leak problems almost always start at the top, at the crown, the flashing, or the cap, and water rarely comes from where the stain on the ceiling suggests. You need an inspection when you see damp masonry, a musty smell near the fireplace, rust on the damper, or water staining on the ceiling or chimney breast, and after any major storm. Chimney Sweep Chico traces the leak to its actual source rather than sealing the first suspect, checking the crown for cracks, the flashing where the chimney meets the roof, the cap fit, and the flue for water entry. We fit proper caps and covers using Gelco and Famco systems when the cap is the culprit, so the fix is a fitted product, not caulk. A chimney leak inspection in Chico typically runs $150-$350 depending on access. You’ll see the photos of what’s failing and get a written plan before any sealing or repair begins.
Tracing the Water Source
Stains lie; the roof line and the crown usually tell the truth. We check flashing, crown condition, and cap fit in that order, since those three cause most leaks. The source gets photographed before we recommend anything.
Caps, Covers, and Exclusion
A missing or loose cap lets rain straight down the flue and animals set up house. We install fitted Gelco and Famco caps sized to the flue rather than a universal cover. Exclusion done properly keeps water and wildlife out for years.
Chimney Camera Inspection
Chimney Camera Inspection uses a video scope to look the full length of the flue, and it’s the only way to see cracks, gaps, offsets, and creosote that are hidden behind the firebox wall. You need one whenever the flue’s condition is unknown, after a chimney fire, as part of a Level 2 inspection, or whenever you’re being told a liner or repair is needed and want proof. Chimney Sweep Chico runs the camera, records the footage, and walks you through it so you can see the same defects we do. This is the answer to the real hesitation most homeowners have: nobody should be told they need thousands of dollars of work they can’t verify. A camera inspection in Chico typically runs $175-$350 depending on flue length and access. If something can safely wait, we say so, and the footage is yours to keep.
How the Video Scan Works
A camera on a flexible rod travels the flue while we watch a live feed and record it. The technician calls out defects by location as the camera passes. You get the recording and a written summary tied to what it shows.
When the Camera Is Essential
Offset flues, older masonry chimneys, and any post-fire situation are where the camera earns its keep. Rigid-liner-only outfits often can’t serve those flues properly. We can, using DuraFlex flexible systems where the fit calls for it.
Brands We Service
We work with a curated roster of professional-grade chimney brands, and that matters because a named product carries manufacturer specs and a documented material trail. We install and service HeatShield for flue resurfacing, restoring damaged tile without a full liner tear-out, a repair option most general sweeps simply can’t offer. We work with DuraFlex flexible liner systems for offset and hard-to-reach flues that rigid liners handle poorly. We fit Gelco and Famco cap systems for weather and animal exclusion, and we work with Olympia Chimney and Copperfield components where the installation calls for them.
Knowing where a given brand’s parts wear and how its systems are specified is what separates a proper repair from a workaround. We tie every repair back to the product’s own specifications, so you have names and documentable materials for your records and for your insurer. Whether you have HeatShield-resurfaced tile, a DuraFlex liner, a Gelco or Famco cap, Olympia Chimney or Copperfield components, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. A fireplace that smokes when it used to draw well usually points to a blockage, a damaged flue, or a smoke chamber problem. It won’t fix itself, and burning through it can make the damage worse.
- A strong, acrid smell even when you’re not burning. That odor often means creosote buildup or a draft pulling from a dirty flue. It’s a signal to get the chimney looked at before the next fire.
- Water stains or damp masonry near the chimney. Moisture means a leak at the crown, flashing, or cap, and water plus masonry plus time equals expensive repair. Get it traced to the source.
- You heard a rumble, pop, or roar from the chimney. That’s the sound of a chimney fire, even if it went out on its own. The flue needs a close check before you burn again.
- Cracked or crumbling mortar in the firebox. Loose joints and spalled brick can let heat reach framing. This is a stop-and-inspect condition, not a wait-and-see one.
Our Process, Step by Step
- 1
Book and scope the visit. We ask about the fireplace or stove, how much you burn, and any symptoms you’ve noticed, then recommend the right inspection level. You know what we’re doing and why before we start.
- 2
Inspect the accessible exterior and roof level. We check the crown, flashing, cap, and masonry from the roof, photographing anything that’s failing. This is where most leak and exclusion problems get caught early.
- 3
Inspect the interior and firebox. Firebox, damper, smoke chamber, and the flue connection all get a close look. We probe joints and check clearances rather than eyeball them.
- 4
Run the video scan. The camera travels the full flue while we record, mapping cracks, gaps, offsets, and creosote by location. You see the same footage and get the recording.
- 5
Write it up and walk you through it. You leave with a written report and photos, sorted into what’s urgent, what’s routine, and what can safely wait. If repair is needed, we quote it to manufacturer spec, and the written estimate sets the final price.
How Much Does Chimney Inspection Cost in Chico?
Chimney inspection in Chico typically runs $125-$450 depending on the level and the home. A basic fireplace inspection usually lands at $125-$275, a standard flue inspection runs $150-$350, and a full Level 2 with video coverage runs $250-$450. A camera scan on its own typically runs $175-$350. Post-fire assessment, which usually includes video and a closer look at heat damage, runs about $200-$450. There’s no service-call fee; the estimate is free and the written estimate sets the final price.
What moves the number: the inspection level, roof access and pitch, whether the flue is offset or hard to reach, how much video coverage the flue needs, and whether we’re also sweeping. A straightforward single-flue masonry chimney on an easy roof sits at the low end. A tall flue, an offset, or a home that needs attic and crawl space review sits higher.
How to avoid overpaying: ask up front which level you’re getting and why, and ask whether the inspection includes video and a written report. Skip anyone who quotes a big liner or masonry job before the camera has even run. Nothing gets recommended here without camera evidence you can see for yourself, and we’ll tell you plainly when work can safely wait. A free estimate means you know the price before we start. Call (844) 320-4731 for an exact quote on your Chico chimney.
Our Service Area Near Chico
We inspect chimneys across Chico and the surrounding towns, including Durham and Paradise, plus Magalia, Orland, Thermalito, Corning, Oroville, South Oroville, and Kelly Ridge. Dispatch runs 7am to 7pm, Sunday through Friday, and we book each visit to the home’s access and layout so the technician arrives ready to work. Whether you’re near downtown Chico or out toward Durham and Paradise, call and we’ll find a time. If you’re not sure which inspection you need, our chimney sweep Chico team can help you sort it out.
Serving Chico, CA – Our Local Coverage Area
We serve Chico and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Chico
A chimney inspection is a documented look at the firebox, damper, smoke chamber, flue, cap, crown, and flashing to confirm the chimney is clean, sound, and safe to burn. It’s different from a sweep, which clears creosote; the inspection tells you what condition everything is in. We photograph what we find and put it in writing. Call (844) 320-4731 for an exact quote, and estimates are free.
Most inspections take 45 minutes to about two hours depending on the level and roof access. A fireplace inspection is on the shorter end; a Level 2 with a full video scan runs longer. We’ll tell you what to expect when you book. Call (844) 320-4731 to schedule.
Inspection in Chico typically runs $125-$450 depending on the level, roof access, and whether video is included. A basic fireplace inspection sits at $125-$275, a Level 2 with video at $250-$450. The written estimate sets the final price. Call (844) 320-4731 for an exact quote; estimates are free.
Yes. We resurface damaged flue tile with HeatShield and install DuraFlex flexible liners, including in offset and hard-to-reach flues. We also fit Gelco and Famco caps and work with Olympia Chimney and Copperfield components. If your chimney needs a repair the camera can verify, we quote it to manufacturer spec.
Same-day booking is often possible. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 320-4731 to book.
Repair and installation work is tied to the manufacturer specifications of the products used, and those materials are documented for your records. We’ll go over the specifics on your written estimate before any work begins. Ask us when you call (844) 320-4731 and we’ll spell out exactly what’s covered.
Clear the area around the fireplace and make sure we can reach the roof access and the firebox. If you can, note the last time the chimney was swept and any symptoms you’ve seen, like smoke backup or a smell. Hold off on burning until the inspection is done. Call (844) 320-4731 if you have questions before we arrive.
Schedule Your Chimney Inspection Service in Chico Today
Don’t head into the burning season guessing at the shape of your flue. Book a chimney inspection in Chico and get a written, photo-backed report before the first fire, with repair quoted to manufacturer spec if anything needs it and a clear word on what can safely wait. Call (844) 320-4731 for a free, no-obligation estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Chico.