Chimney Repair in Kelly Ridge, CA | Chimney Sweep Chico

Chimney Repair in Kelly Ridge - Inspected on Camera, Then Priced in Writing

Liner and masonry work is where this trade gets a bad name, so nothing is quoted until you have seen the camera footage yourself. Then a written, itemized price with no scope creep.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

Sweep & inspectionSweep & inspection
Caps & crownsCaps & crowns
Flue reliningFlue relining
Masonry repairMasonry repair
Gas fireplace serviceGas fireplace service
Every visit starts with

Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed

Worth knowing

Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.

Get your free estimate

Fast, Reliable Chimney Repair Across Kelly Ridge

Chimney repair in Kelly Ridge is mostly about what happens above the roofline on a sloped lot, where brush and timber sit close and a wood stove carries real heat through winter. We work the foothills above Oroville and know how these homes are put together: additions built out over the grade, second flues tied into a single stack, and wood stoves and inserts dropped into older fireboxes long after the house was finished. A cracked crown or a liner that no longer matches the appliance isn’t cosmetic here. It’s fire safety. Call (844) 320-4731 for a free estimate, and we’ll document what we find before we quote anything. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.

Call (844) 320-4731

Why Kelly Ridge Homeowners Call Chimney Sweep Chico for Chimney Repair

Our chimney repair team (Chimney Repair) works on the same kinds of chimneys throughout the foothills, and Kelly Ridge homes have their own pattern. People call us because a sweep report they’d had done elsewhere named problems but nobody would take the repair, or because a neighbor’s smoke seemed to be showing up on the wrong side of a shared stack. We take that seriously. The inspection comes first, the findings are written down and photographed, and the repair is quoted off what the camera and the visual survey actually show.

Kelly Ridge customers tell us the part that mattered was having one provider carry the sweep, the inspection and the repair rather than chasing three contractors. We get the same feedback about the paperwork: repairs tied to named manufacturer systems give homeowners a documented material trail for their records and for their insurer if a claim ever comes up. We don’t quote work that can safely wait, and we say so plainly when it can. That’s the reputation we’d rather have in Kelly Ridge than a running bill.

Explore

Styles & brands we work with

  • Sweep & inspection
  • Caps & crowns
  • Flue relining
  • Masonry repair
  • Gas fireplace service

Chimney Masonry Repair in Kelly Ridge

Chimney Masonry Repair in Kelly Ridge usually starts with the water side of the problem, because hot dry summers and cool wet winters wear masonry joints loose and open brick faces to spalling. A typical mortar repointing job here runs $450 – $1,200, spalling brick repair runs $600 – $2,500 depending on how much brick has to come out, and chimney waterproofing runs $350 – $800. Full chimney rebuilding, when a stack has gone too far to repair in place, runs $3,000 – $9,000. Those are estimates for the local market; the written estimate sets the final price.

Repointing and Tuckpointing Joints

Repointing and tuckpointing restore the mortar between bricks without replacing sound brick. On Kelly Ridge chimneys the joints most often fail at the crown line and on the weather-facing side, and grinding out and repacking them with a proper mortar mix stops water from tracking deeper into the stack. It’s the least expensive way to add years to a masonry chimney that’s otherwise solid.

Waterproofing After the Repair

Waterproofing goes on after mortar and brick work has cured, not instead of it. A breathable sealer keeps bulk water out of the masonry while letting moisture inside the stack escape, which matters on a foothill chimney that takes sun on one face and weather on the other. Sealing a wall that’s still actively leaking just traps the water.

Chimney Cap Installation in Kelly Ridge

Chimney Cap Installation in Kelly Ridge is a fire-hardening job as much as a repair. Cap screens foul with debris through the dry months, and a spark arrestor that’s clogged or missing is a direct risk to the surrounding brush during red-flag warnings. Fitted cap and cover work with Gelco and Famco systems typically runs $250 – $700 installed, depending on the flue count and the cap style.

Why Fitted Caps Beat Sheet-Metal Patches

A fitted cap or cover is sized to the flue and anchored to the crown, rather than a folded piece of sheet metal wedged over the top. That fit is what keeps birds, nests and weather out through the season instead of until the first good wind. It also holds a proper screen, which is the part that actually contains embers.

Caps After the Dry Months

By the end of summer, most caps in this area have collected leaves, twigs and nest material that block draft and can catch a spark. Checking the cap before fire season is a routine part of our sweep visit. If it’s fouled but sound, it gets cleared; if it’s rusted through or the screen is torn, it gets replaced.

Trusted Brands We Service in Kelly Ridge

Repairs here are tied to manufacturer specifications, not improvised workarounds. We install and service DuraFlex flexible liner systems, which allow us to fit a properly sized liner in offset or hard-to-reach flues where a rigid-only approach falls short. HeatShield resurfacing lets us restore damaged flue tile without a full tear-out, which most general sweeps simply can’t offer. Cap and cover work gets fitted Gelco and Famco systems. Olympia Chimney and Copperfield round out the professional-grade products we handle. We don’t claim to stock parts locally or turn work around overnight; we quote what your flue actually needs and schedule it. What you get is traceable material and a documented record.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Common Chimney Repair Problems We See in Kelly Ridge Homes

The one true local insight on this page: because Kelly Ridge’s 1970s – 2000s homes often have additions and second flues sharing a single stack, a neighbor’s wood stove or insert can vent into the same flue system. A repair that doesn’t verify flue segregation risks cross-contamination of exhaust and creosote between attached units. That’s why we look at the whole stack and the adjoining appliance, not just the firebox we were called to.

  • Mismatched liner and insert sizing. Retrofit stoves and inserts are frequently dropped into an older firebox without matching the liner to the appliance. Creosote builds in the gaps and draft falters, and it goes unnoticed until a Level 2 inspection catches it.
  • Shared or adjacent flues in attached properties. A neighbor’s appliance can exhaust into the same stack, transferring creosote and smoke into a flue that isn’t theirs. Segregation has to be confirmed, not assumed.
  • Fouled caps and debris screens after the dry months. Blocked screens kill draft and can emit sparks during red-flag warnings. That’s a WUI fire risk, not a maintenance nuisance.
  • Spalling brick and failed mortar at the crown line. Hot summers and wet winters work joints loose and open brick faces. Left alone, the crown and stack weather faster than the rest of the chimney.

Pricing for Chimney Repair in Kelly Ridge, CA

Pricing in the Kelly Ridge market follows the work, not a flat rate. A masonry repair with repointing runs $450 – $1,200; spalling brick repair $600 – $2,500; waterproofing $350 – $800; fitted cap installation $250 – $700; and a full chimney rebuild $3,000 – $9,000. What moves a job up or down is the number of flues on the stack, how accessible the roof and chimney are on a sloped lot, whether an insert needs a correctly sized liner, and how far the masonry damage has gone. Liner work is quoted separately once the inspection shows what’s actually there. Every job is quoted off a free written estimate, and that estimate sets the final price.

We Also Serve Cities Near Kelly Ridge

We take chimney repair calls throughout the surrounding foothill and valley communities, including Oroville, South Oroville, Paradise and Durham. Kelly Ridge sits at the heart of the work we do here, and homeowners just across the ridge get the same inspection-first approach. If you’re outside those areas, call and we’ll tell you honestly whether we cover your street.

Serving Kelly Ridge, CA – Our Local Coverage Area

We serve Kelly Ridge and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

FAQs About Chimney Repair in Kelly Ridge

Why Kelly Ridge Chooses Chimney Sweep Chico

We set the standard for chimney repair in Kelly Ridge.

Evidence Before Recommendations

Every sweep includes a camera inspection and a photo report. If we find something, you see it before we quote it - no repair is ever recommended on our word alone.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Kelly Ridge

Getting your chimney repair handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your chimney repair needs and we provide an upfront, transparent quote with no obligation and no hidden fees.

2

We Book a Time That Works for You

A background-checked, certified technician arrives at the time we agree on.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local chimney repair pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Kelly Ridge Customers Say

Trusted by homeowners across Kelly Ridge and surrounding areas.

★★★★★

"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."

Claudia Martinez
★★★★★

"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."

Jodi Walsh
★★★★★

"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."

Amit Rao

Ready for Chimney Repair in Kelly Ridge?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast help in Kelly Ridge.

(844) 320-4731

Request a Free Estimate in Kelly Ridge

Tell us about your chimney repair needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Now
Local Service Coverage
Call Now - We Answer 24/7