Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Chimney Sweep Across Chico
If you burn wood in Chico, your chimney earns its keep from November through March, and it needs a real cleaning before the season starts. We sweep, inspect, and repair chimneys across Chico, from the Craftsman bungalows near downtown to the newer subdivisions on the north and east sides. Our technicians have up to 8 years of experience, and they know how differently an early-1900s brick flue and a modern prefab metal fireplace need to be handled. Call (844) 320-4731 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Chico Homeowners Call Chimney Sweep Chico for Chimney Sweep
Chico is a wood-burning town. Plenty of older homes here still lean on the fireplace as a meaningful heat source, not just a decoration, so the creosote load we find is often heavier than a once-a-year sweep would suggest. That shapes how we work. We bring a camera, we document what we find, and we show you the footage before anyone recommends a repair. You should never have to take our word for a cracked flue tile.
Our technicians have up to 8 years of experience with both old masonry and the modern spark-arrestor setups that wildland-urban interface properties often need. We handle sweeping, inspection, and repair under one provider, so a sweep report doesn’t leave you hunting for a separate contractor who can actually do the work. Flat pricing is agreed before we book, and the written estimate sets the final number.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Services in Chico
Chimney Services in Chico start with a proper sweep, and the job is rarely just brushing. We remove creosote and soot from the flue, firebox, smoke chamber, and damper, then check what the cleaning uncovered. In Chico’s older bungalows, a routine sweep often turns up spalling mortar or a missing cap, and that’s the point where an honest report matters more than a sales pitch. A typical annual sweep and Level 1 inspection in Chico runs $180 – $340, while a Level 2 inspection with camera work runs $250 – $450.
Creosote and Soot Removal
Frequent hot fires in a heavily used fireplace can build creosote past the fluffy first stage into glazed deposits that a standard brush won’t touch. We remove what we can safely remove and tell you plainly when the glaze is too far along for sweeping alone. Nothing gets recommended beyond that without camera evidence you can see.

Fireplace and Firebox Cleaning
We clear ash, soot, and buildup from the firebox and the smoke shelf above it, where debris collects and restricts draft. In a valley where winter inversions can trap smoke, a clean, well-drafted flue matters for the air in your home and in the neighborhood.

Chimney Sweep Certified in Chico
When we say Chimney Sweep Certified in Chico, we mean the technician who shows up has been trained on the specific flue types found here, and the findings are documented in writing for your records. That matters most in older housing stock, where unlined clay-tile flues develop hairline cracks from repeated heating cycles and creosote can seep into wall cavities. A Level 2 inspection with a camera is how we catch that before it becomes a problem. Certified-level inspection work in Chico typically runs $250 – $450, and the report is yours to keep.
Camera-Verified Findings
We run a camera down the flue and record what it sees, cracks, gaps, offsets, and all. You watch the footage with us. If the video is clean, we tell you the chimney can safely wait; if it shows damage, we show you exactly where.
Written Reports for Your Records
Every inspection comes with a written report and photo documentation. Repair work ties to manufacturer product specifications, which gives you a traceable material trail for homeowner records and for working with your insurer.
Trusted Brands We Service in Chico
We work with a curated roster of professional-grade chimney brands rather than generic hardware-store parts. HeatShield resurfacing lets us restore damaged flue tile without a full liner tear-out, and DuraFlex flexible liner systems allow correct installation in offset or hard-to-reach flues that rigid liners can’t fit. Gelco cap systems give you fitted weather and animal exclusion instead of improvised sheet metal. We don’t stock parts, but sourcing through these brands means fast turnaround on manufacturer-spec materials. Whether it’s a HeatShield restoration or a DuraFlex liner, the repair meets established specs, not a workaround.
Common Chimney Sweep Problems We See in Chico Homes
- Unlined clay-tile flues in early-1900s Craftsman homes. Repeated heating cycles crack the tile, and creosote works its way into the surrounding masonry. A camera inspection is the only reliable way to know whether the flue is still sound.
- Orphaned masonry chimneys. In the older avenues near downtown, it’s common to find a stack left after a furnace upgrade, still venting an appliance it was never relined for. These leak creosote odors into living spaces and need relining before they can be safely reused.
- Third-degree creosote from heavy burning. Homes that lean on the fireplace as real heat build glazed, hardened creosote that a standard sweep won’t remove. We assess whether resurfacing or relining is the right call.
- Prefab metal fireplaces cleaned with the wrong technique. In the north-side subdivisions, some prefab units get scrubbed with masonry methods, which damages the thin metal flue and voids the manufacturer’s warranty. These need a gentler approach.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Sweep in Chico, CA
A typical chimney sweep in Chico runs $180 – $340 including a Level 1 inspection, and a Level 2 inspection with camera documentation runs $250 – $450. Creosote removal beyond a standard sweep, cap installation using Gelco or Famco systems, and relining with HeatShield or DuraFlex are quoted per job by a written estimate, so you know the number before we book. The estimate is free. What moves the price is real: how much creosote has built up, whether the flue is offset or hard to reach, and whether the camera shows damage that needs repair. We don’t recommend liner or masonry work you can’t verify, and we say plainly when a repair can safely wait.
We Also Serve Cities Near Chico
We serve homeowners throughout the surrounding area as well, including Durham, Paradise, Magalia, and Orland. The same camera-verified approach applies wherever the chimney is, whether it’s an older masonry stack or a newer install. If you’re outside Chico proper, call and we’ll confirm coverage and book your sweep. Learn more about our chimney sweep services and what a visit involves.
Serving Chico, CA – Our Local Coverage Area
We serve Chico and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Sweep in Chico
Yes, it can be swept, but an unlined brick flue should be inspected with a camera first so we know what we’re working with. Repeated heating cycles crack old masonry, and creosote can migrate into the surrounding structure. We sweep carefully and document the flue condition, then recommend relining only if the footage shows it’s needed. Call (844) 320-4731 for an exact quote – estimates are free.
You can’t reliably tell from the outside, which is why we run a camera and show you the footage. Third-degree creosote is glazed, hardened, and shiny, and a standard brush won’t remove it; it needs chemical treatment or, in some cases, relining. We tell you which stage you’re at and back it up with what the camera shows. Call (844) 320-4731 to book an inspection.
An orphaned chimney is a masonry stack left behind after a furnace upgrade, still connected to an appliance the flue was never relined for. Because the flue was sized and built for a different appliance, it doesn’t draft correctly, and creosote odors drift back into living spaces. Relining fixes it. This situation is common in the older avenues near downtown Chico and less so in newer housing. Call (844) 320-4731 to schedule an assessment.
Yes, an annual inspection is worth doing even without regular fires, since an unused flue can still collect debris, host animals, or develop cracks from weather and settling. A Level 1 inspection runs $180 – $340 and catches small problems before they grow. If your fireplace sits idle most winters, this is how you keep it safe for the occasional fire. Call (844) 320-4731 for an exact quote – estimates are free.
Not every sweep handles prefab units correctly, and using masonry techniques on a thin metal flue can damage it and void the manufacturer’s warranty. We clean prefab metal fireplaces with the right method for the material and check the flue and cap while we’re there. If you’re unsure what type of fireplace you have, we’ll identify it during the visit. Call (844) 320-4731 to book.
Book Your Chico Chimney Sweep Before the Burning Season
Chico’s burn season runs November through March, and the time to catch a cracked flue tile or a glazed creosote load is before the first fire, not after. We sweep, inspect, and repair with camera evidence you can see, and we tell you honestly when work can wait. Call (844) 320-4731 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Chimney Sweep Chico.