Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Liner & Rebuild Cost in Chico?
Chimney liner and rebuild work in Chico typically runs $1,800 to $6,500 for most projects, with a stainless flex liner installation landing around $2,800 to $4,200 and a partial chimney rebuild (crown, top courses, or the smoke chamber) in the $1,200 to $5,000 range depending on how much masonry has to come down. A HeatShield flue resurfacing job, which restores cracked tile without a full tear-out, usually comes in between $1,600 and $2,900. Those ranges cover the liner or masonry work itself; the written estimate you get after an inspection is what sets the final price.
Chico sees enough wood burning in the fall and winter that liner condition matters more than most homeowners realize. Tile liners crack, offset flues collect creosote in ways a straight sweep can’t always clear, and a rebuild is often cheaper than a full house of repair work once a chimney starts pulling apart at the crown or the top courses. We document what we find, then quote the liner or the rebuild against a known product.
Key Takeaways
- Full stainless flex liner installation: $2,800 to $4,200 typical for a standard one-story flue.
- HeatShield resurfacing (repair without a tear-out): $1,600 to $2,900.
- Partial rebuild (crown, top courses, or smoke chamber): $1,200 to $5,000.
- Full rebuild from the roofline down: $4,500 to $9,000+ on taller or heavily damaged stacks.
- Estimates are free. Call (844) 320-4731. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Chimney Liner & Rebuild Cost Breakdown (2026)
Here’s how the work breaks down for the Chico market this year. Every line is an estimate until we’ve seen the flue, but these ranges are what jobs in this area actually land in.
| Work item | Typical range | What it covers |
|---|---|---|
| Level 2 inspection before quoting | $150 – $350 | Camera scan of the flue, written findings, photos you keep |
| DuraFlex stainless flex liner (standard flue) | $2,800 – $4,200 | Liner, insulation, top plate, cap, and tie-in |
| DuraFlex liner in an offset or angled flue | $3,400 – $5,200 | Flexible liner run through offsets rigid liners can’t clear |
| HeatShield tile resurfacing | $1,600 – $2,900 | Restoring cracked or pitted flue tile without tear-out |
| Crown repair or replacement | $1,200 – $2,400 | Crown rebuild, crack sealing, drip edge correction |
| Top-courses rebuild (top few feet of stack) | $1,800 – $3,800 | Removing loose masonry, re-laying courses, new crown |
| Smoke chamber rebuild | $2,200 – $4,800 | Rebuilding the transition between firebox and flue |
| Full chimney rebuild (roofline to cap) | $4,500 – $9,000+ | Complete masonry rebuild, new crown, new cap |
| Gelco or Famco cap install | $250 – $650 | Fitted animal and weather exclusion, manufacturer spec |
What pushes a job up? Height and access matter first. A chimney on a steep roof or a two-story wall costs more to work on than a one-story stack you can reach with a normal ladder setup. Flue shape matters too: a round flue takes a flex liner easily, while a square or rectangular clay tile flue may need resizing or HeatShield resurfacing to accept a liner at all. An offset flue is the classic case, and it’s where flexible DuraFlex liners do what rigid liners can’t. Condition of the masonry comes next. A crown-only repair stays on the smaller end. Once the mortar joints and the top courses are spalling, we’re into rebuild territory, and the price moves accordingly. Finally, the liner itself: insulation, the length of the run, and the type of appliance (open fireplace, insert, or wood stove) all change the material cost.
What Affects Chimney Liner & Rebuild Pricing in Chico
Chico has its own set of conditions that shape a chimney quote. The area burns a lot of wood in cooler months, the original masonry stock on older homes around town varies widely, and the summer heat plus the wet winters have a real effect on mortar and crown condition. Here are the factors we weigh when we put a number together.
- Flue geometry. Round, straight flues are the simplest liner job. Offset or angled flues need a flexible system, and that adds material and labor to the quote.
- Existing tile condition. Sound tile can often be resurfaced with HeatShield at roughly half the cost of a full liner replacement. Cracked-through tile with gaps between tiles usually means a liner, not a surface repair.
- Crown and top-course wear. Chico’s hot summers and wet winters expand and contract masonry. A crown that’s cracked but sound is a repair. A crown that’s separated from the flue is a rebuild sign.
- Chimney height and roof pitch. Taller stacks and steeper roof pitches add labor. A second-story chimney takes longer to work than a single-story one.
- Appliance type. A wood stove or insert needs a correctly sized, insulated liner matched to the appliance’s flue collar. An open fireplace is more forgiving but still needs a properly sized liner for the draft to work.
- Product selection. The brand matters. We install DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield because those products carry documented specifications and a traceable material trail for your records and your insurer.
Liner vs. Rebuild: Which One Do You Actually Need?
A liner and a rebuild solve two different problems, and choosing the wrong one wastes money. A liner fixes the inside of the flue: cracked tile, gaps, or a flue that’s too large or too small for the appliance. A rebuild fixes the outside structure: the crown, the masonry courses, the smoke chamber, or the chimney’s overall integrity. Sometimes a job needs both. We never quote a rebuild when a resurface or liner will do, and we never patch over masonry that’s actively failing.
When a liner or resurfacing is the right call
- The flue tile is cracked, pitted, or missing in places, but the chimney’s outer masonry is sound.
- You’re adding a wood insert or stove and need a correctly sized flue.
- The flue is offset or awkward and needs a flexible system to line it properly.
- The chimney has an old unlined flue from an earlier era and no liner at all.
When a rebuild is the right call
- The crown is cracked through, separated, or missing entirely.
- The top courses are spalling or the mortar joints are eroded to the point the stack is unstable.
- The smoke chamber is badly deteriorated and won’t hold a proper parge coat.
- Water has gotten into the masonry and the structure has begun to fail.
How We Price a Chimney Liner or Rebuild in Chico
We start with a Level 2 inspection, which is a camera scan of the flue plus a visual of the accessible exterior. You get a written report and photos, whether or not you hire us for the repair. That report drives the quote. From there, we match the product to the job: a DuraFlex liner for a flexible run or an offset, HeatShield for resurfacing sound-but-scarred tile, Gelco or Famco for the cap, and Olympia Chimney or Copperfield for the components that tie it together. Each product comes with manufacturer specifications, so your paperwork shows exactly what went into the flue.
We also handle sweep, inspection, and repair under one roof, which means you don’t have to take a sweep’s report to a separate masonry contractor and hope the two of them see eye to eye. The team that inspects is the team that quotes and the team that installs. Our technicians have up to 8 years of experience, and we’re licensed and insured.
A quick word on flue safety
Flue liners and chimney rebuilds sit in the part of the trade where a bad job does real damage. A liner that isn’t sized or insulated correctly can let heat transfer into framing or allow creosote to build up in ways the appliance wasn’t designed for. Masonry that’s unstable at the top can fail onto a roof. We mention this not to worry you, but because we’ve seen what a shortcut liner install looks like and it isn’t a small problem. If you’re not sure about your flue, get it looked at before you burn, and leave the repair itself to a trained professional.
How to Save on Chimney Liner & Rebuild in Chico
There’s a real cost difference between doing this well and doing it twice. These are the moves that keep the number down without cutting corners.
- Get the inspection before the quote, not after. A written report with photos from a Level 2 inspection is the difference between an accurate bid and a guess. If your sweep offers to quote repair without the camera scan, get the scan first.
- Ask about resurfacing before you assume a liner. HeatShield resurfacing costs less than a full liner install, and it works on a meaningful share of cracked-tile jobs. Most general sweeps can’t offer it, so it’s worth asking.
- Fix the crown early. A crown repair today is far cheaper than a top-courses rebuild in two seasons. Water is what turns a $1,500 repair into a $4,000 rebuild.
- Add a fitted cap. A Gelco or Famco cap keeps rain, birds, and squirrels out of the flue. It’s a small line item, and it prevents the kind of flue damage that leads to a liner job in the first place.
- Time it before the burning season. Scheduling repairs in the warmer months means the work gets done before the first fire, and you’re not calling around when every sweep is booked solid.
- Get two written estimates. Compare apples to apples: the same product, the same liner length, the same cap. The lowest number often leaves something out. Free estimates mean there’s no cost to getting that comparison.
Call (844) 320-4731 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
How Long Does the Work Take?
A standard DuraFlex liner install is usually a one-day job once the inspection is done. A HeatShield resurfacing is also typically a day. A partial rebuild with a new crown is often two to three days, and a full rebuild from the roofline down can run a week or more depending on the weather and the masonry condition. We schedule the work after the quote is signed, and we tell you up front how many days to expect.
Do You Need a Liner if the Chimney Already Has One?
Sometimes. A clay-tile flue with intact, unpitted tile and consistent mortar joints can last for years without a liner. A flue with cracked or missing tile, gaps at the joints, or an unlined older chimney needs one. The camera scan tells you which one you have. That’s the reason we lead with inspection: it’s the only honest way to answer this question, and we’d rather show you the picture than sell you a liner you don’t need.
FAQs – Chimney Liner & Rebuild Cost
How much does a chimney liner cost in Chico?
A stainless flex liner installation in Chico typically costs $2,800 to $4,200 for a standard one-story flue, and $3,400 to $5,200 for an offset or angled flue that needs a flexible DuraFlex run. The final price depends on the flue’s condition, the length of the run, and whether insulation is needed. Call (844) 320-4731 for an exact quote; estimates are free.
How much does a chimney rebuild cost in Chico?
A partial rebuild (crown, top courses, or smoke chamber) usually runs $1,200 to $5,000, while a full rebuild from the roofline down can range from $4,500 to $9,000 or more. What drives the number is how much masonry has to come down and how accessible the stack is. An on-site look gives you a firm number. Call (844) 320-4731; the estimate costs nothing.
Is it cheaper to repair or replace a chimney liner?
Repair is almost always cheaper when it’s an option. HeatShield resurfacing at $1,600 to $2,900 typically costs less than half the price of a full liner replacement at $2,800 to $4,200, and it works whenever the tile is cracked but still structurally present. When the tile is missing or the joints have separated, resurfacing won’t hold and a liner is the right call. Call (844) 320-4731 to find out which applies to your flue.
Do you need a permit for a chimney liner in Chico?
Most cities require a permit for structural chimney work, and that can include a rebuild or certain liner installations, so ask the city’s building department before work starts. A properly licensed contractor will know how to handle the permit side, and we can walk you through what’s typically required. Call (844) 320-4731 with questions before the burning season.
Can you install a liner in an offset flue?
Yes. Offsets and hard-to-reach flues are where flexible DuraFlex liners earn their keep. They run through the offset and finish with a proper top plate and cap, giving you a continuous, sealed flue where a rigid liner would have to be pieced together. That’s a common installation in older Chico homes, and it usually lands in the $3,400 to $5,200 range. Call (844) 320-4731 for a look at yours.
What brands do you use for liners and chimney work?
We install and service DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield. Those are professional-grade products with documented specifications, and they give you a clear material trail for your records and for your insurer. We don’t swap in generic hardware-store parts for a job that needs a manufacturer-rated system.
Get a Written Estimate Before the Burning Season
If your chimney hasn’t been looked at since last winter, now is the time. We sweep, inspect, and repair under one roof, and the written findings from the inspection are yours to keep whether or not you book the work. Our technicians have up to 8 years of experience, we’re licensed and insured, and every repair we quote is tied to the product that’s actually going into your flue.
Call (844) 320-4731 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Same-day service is available. If you’d rather read more about the area we cover, start with Chico and see how we approach chimney sweep Chico work start to finish.
Pricing reflects the Chico market as of 2026. Chimney Sweep Chico offers free estimates – call (844) 320-4731. Written by the team at Chimney Sweep Chico.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Claudia Martinez"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jodi Walsh"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Amit Rao