Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Cap & Crown Cost in Chico?
A chimney cap in Chico typically runs $185 to $480 installed, and crown repair usually lands between $350 and $850 depending on how much of the crown needs rebuilding. A full crown replacement, poured and finished to shed water off the flue, generally falls in the $650 to $1,400 range. Those numbers cover the part, the fitting, and the labor to install it correctly on a real flue, not a hardware-store approximation.
We’re Chimney Sweep Chico, and cap and crown work is one of the three things we do: sweeping, repair, and inspection. We work with fitted cap systems from Gelco and Famco and tie our crown work to the same manufacturer specifications we use on everything else, so you get a documented material trail you can file away. Everything starts with a free estimate and a written price, and our technicians have up to 8 years of experience on this kind of work.
Chimney Cap & Crown Cost Breakdown (2026)
Here’s how the line items usually break out for a Chico home. These are typical estimates, not quotes. The written estimate you get after we look at your flue sets the final price.
| Line Item | Typical Range | What It Covers |
|---|---|---|
| Single-flue cap, fitted | $185 – $320 | Gelco or Famco cap sized to your flue, with animal and weather exclusion |
| Multi-flue cap | $320 – $480 | Single cap covering two or more flues, screened on all openings |
| Custom or oversized cap | $400 – $650 | Non-standard flue dimensions or a decorative top you already own and want fitted |
| Cap removal and refit | $120 – $220 | Pulling a damaged cap, repairing the mount, reinstalling or replacing |
| Crown patch and seal | $350 – $550 | Hairline cracks and surface spalling sealed so water stops getting in |
| Crown rebuild (partial) | $450 – $850 | Removing the failed section, re-forming the slope, finishing the crown |
| Full crown replacement | $650 – $1,400 | Old crown removed entirely and poured new over the flue top, sloped to shed water |
| Crown with cap combined | $750 – $1,600 | Doing both at once, which is almost always the smarter buy |
What drives the price up: the number of flues, the height and pitch of your roof, whether the crown is cracked and patched a dozen times already, and whether a past repair has to be undone before we start. A simple single-flue house with a healthy crown near the low end of the range is a quick job. A two-story home with three flues, a failed crown, and a cap that’s been torn off by wind sits near the top.
What keeps it reasonable: catching the crown before it spalls through, combining cap and crown in one visit, and choosing a fitted cap from a brand with a spec sheet rather than improvising. When we quote a repair, we quote it against the manufacturer spec for that product, not a verbal “we’ll make it work.”
What Affects Chimney Cap & Crown Pricing in Chico
Chico’s climate and housing stock both play into what cap and crown work costs here. A few of the factors we see most:
- Hot, dry summers and wet winters. Chico summers bake a crown and winters bring steady rain. That cycle opens hairline cracks in a poured crown, and water gets into the masonry behind it. The longer a crack runs, the further into the wreck the price goes.
- Wildfire smoke and airborne debris. Smoke and ash from the valley’s fire season settle on caps and screens. A clogged screen shortens the life of a cap because the flue can’t vent cleanly, and a cap that’s been cooked and clogged for years usually gets replaced rather than cleaned.
- Roof pitch and access. Chico has plenty of older homes with steep roofs and tight setbacks. A cap that’s easy to reach from a low roof is cheaper to fit than one that needs ladders, roof anchors, and care around fragile roofing.
- Flue configuration. Offset or oddly shaped flues need a fitted system, not a generic lid. When a flue has an offset or a hard-to-reach crown, we favor DuraFlex flexible systems so the install is precise instead of forced.
- Older construction and past patches. Many Chico homes have had a crown patched multiple times by previous owners. Removing old patching, re-leveling the top, and starting fresh costs more than a clean crown that just needs a seal.
- Material choice. Galvanized, stainless, copper, and painted finishes sit at different price points. A stainless cap or a copper cap costs more up front but holds up better against the weather swings here than a light galvanized unit.
If a flue is also damaged inside, the crown and cap come with an inspection finding. We can resurface a cracked flue tile with HeatShield, which restores the tile without a full liner tear-out. That’s a repair option most general sweeps can’t offer, and it changes the total picture when you’re deciding whether to replace the liner at the same time.
All of this is why we inspect before we quote. If you’re not sure your cap or crown is the problem, an inspection tells you. See our chimney sweep chico page for the full round of what a visit covers, or read on for how we price things.
How to Save on Chimney Cap & Crown
Saving on cap and crown work comes down to timing and doing it once, properly. A few practical moves:
- Catch the crown early. A $350 to $550 seal on a crown with hairline cracks is much cheaper than a $1,400 rebuild after water has worked its way into the flue. Have the crown looked at before the burning season, not after a leak shows up on your ceiling.
- Combine the cap and crown. If both need work, doing them in one visit cuts labor over two separate calls. The combined range ($750 to $1,600) is usually lower than two appointments.
- Choose a fitted system, not a lid. A Gelco or Famco cap sized to your flue does its job for the long haul. A generic cap that doesn’t fit degrades faster and gets replaced sooner, which costs more overall than paying once for the right fit.
- Get a written inspection finding. If a sweep says the crown is fine, have that in writing. If a repair is needed, the manufacturer specs give you the product and the record. Insurance and homeowner files both want that trail.
- Ask for the estimate, and ask for the options. There’s often a way to patch-and-seal versus a full rebuild, and we’ll price both so you can choose with real numbers.
Our estimates are free. Call (844) 320-4731. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. We’d rather see your crown before you spend anything.
Cap or Crown: Which Do You Actually Need?
A cap keeps water, animals, and debris out of the flue. A crown is the concrete top of the chimney itself, and its slope sheds water away from the flue. They’re two different parts, and a lot of homeowners call us expecting one and learn they need the other. We tell you which based on what we find, and we show you the photos.
Common signs it’s the crown: a dark water stain on the ceiling near the chimney, crumbling concrete at the top of the stack, rust streaks down the exterior on a flue that’s capped. Common signs it’s the cap: birds or squirrels getting in, a flue with no screen, a cap that’s rusty, dented, or missing.
What Does a Cap or Crown Replacement Involve?
For a cap: we measure the flue, choose a Gelco or Famco system that fits, and install it with a proper mount and screen. For a crown: we remove the failed top, form a slope that sheds water, finish it, and leave it looking right. On a hard-to-reach flue, we use the right liner system (DuraFlex when the flue is offset) so the fit stays correct.
The work is done by a trained technician. If the flue is also damaged inside, we may recommend HeatShield resurfacing as an alternative to a full liner replacement. We document every material used, which helps if you ever need the record for an insurer or a future sale.
Can You Install a Cap or Crown on an Older Chico Home?
Yes, and older homes are where careful fitting matters most. Older flues often have irregular dimensions, patched masonry, and roofs that aren’t flat. A fitted cap from a recognized brand handles that. A hardware-store lid usually doesn’t. Our chimney repair work covers the flue and the crown together, so the result is a system, not a patch.
If the chimney is in rough shape inside, that’s a repair finding on the inspection report, not something we hide inside the cap price. We can do the crown, the cap, and the flue repair under one set of hands. If you want the full picture of what a repair visit from us looks like, see our Chico service page.
FAQs – Chimney Cap & Crown Cost
How much does a chimney cap cost in Chico?
A fitted chimney cap in Chico typically runs $185 to $320 for a single flue and $320 to $480 for a multi-flue cap. Custom or oversized caps run $400 to $650. Call (844) 320-4731 for an exact quote; estimates are free.
How much is crown repair vs. full crown replacement?
Crown repair (patch and seal) is usually $350 to $550, and a full crown replacement runs $650 to $1,400. A partial rebuild sits in the $450 to $850 middle. If you have a crack or a crumbly crown, get it priced before the burning season and you’ll know which one your chimney needs.
Is it cheaper to do the cap and crown at the same time?
Yes, usually. Combining cap and crown work runs $750 to $1,600, and the labor saving over two separate appointments is real. Call (844) 320-4731 to get both priced in one visit.
How long does a chimney cap or crown last in Chico?
A professionally fitted stainless or copper cap and a properly sloped crown typically last a decade or more with a little upkeep. Galvanized caps that aren’t fitted tend to fail sooner, especially in Chico’s hot-dry, wet-winter swing. If yours is rusty, dented, or missing its screen, it’s worth a look.
Can a damaged crown or missing cap cause water damage?
Yes. A cracked crown or a missing cap lets water into the flue and the masonry around it, which shows up as ceiling stains, rusted metal, or a crumbling stack. The repair bill goes up the longer the leak runs. If you’re seeing any of those signs, have us look at it. Prices for a patch and seal start around $350, and calling early is cheaper than calling late.
One more thing on safety: if a cap or crown looks like it’s failing and the flue itself shows damage, treat the chimney as off-limits for burning until it’s been checked by a trained professional. Chimney flues and the heat they carry aren’t a place for a homeowner repair attempt.
Key Takeaways
- Chimney cap installed in Chico: typically $185 to $480.
- Crown repair: $350 to $550. Full crown replacement: $650 to $1,400.
- Cap and crown together: $750 to $1,600, a better buy than two separate calls.
- Our technicians have up to 8 years of experience, and we work with fitted Gelco, Famco, DuraFlex, HeatShield, Olympia Chimney, and Copperfield systems.
- The written estimate sets the final price, and our estimate is free.
If you’re not sure whether your chimney needs a cap, a crown, or both, that’s exactly what an inspection answers. We document what we find so you can make a call with real numbers in front of you. Call (844) 320-4731. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and closed Saturday. We’ll schedule a free estimate and give you a written price you can plan around before the burning season starts.
Pricing reflects the Chico market as of 2026. Chimney Sweep Chico offers free estimates – call (844) 320-4731.
Written by the team at Chimney Sweep Chico.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Claudia Martinez"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jodi Walsh"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Amit Rao