Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
See the difference
Before
After
Before
After
Before
AfterHow Much Does Chimney Repair Cost in Chico?
Chimney repair in Chico typically costs $285 to $1,450, with most common fixes landing between $400 and $800. A crown crack or a fitted cap runs $285 to $625, flue tile resurfacing with HeatShield runs $950 to $1,800, and a full flexible liner installation for an offset flue runs $1,900 to $4,200. The written estimate always sets the final price, and estimates are free.
We’re Chimney Sweep Chico, and we handle sweeping, inspection, and chimney repair under one roof, so you don’t have to chase down a second contractor after a sweep report. The ranges below are what we see on Chico jobs as of 2026. They’re estimates, not quotes: every chimney is shaped differently, and the written estimate is what counts.
Key Takeaways
- Typical Chico chimney repair: $285 – $1,450, with most jobs between $400 and $800.
- HeatShield flue resurfacing ($950 – $1,800) can restore cracked tiles without a full liner tear-out.
- DuraFlex flexible liners ($1,900 – $4,200) fit offset and hard-to-reach flues that rigid liners can’t.
- Crown, cap, and flashing work is the most common repair in this climate.
- Our technicians have up to 8 years of experience. Estimates are free.
Chimney Repair Cost Breakdown (2026)
Here’s how the line items stack up for the Chico market. Ranges reflect materials, labor, and access; the written estimate narrows them to your flue.
| Repair item | Typical range | What it covers |
|---|---|---|
| Crown rebuild or crack repair | $385 – $950 | Mortar crown patch, full crown rebuild, or sealant over hairline cracks |
| Fitted cap or cover (Gelco, Famco) | $285 – $625 | Stainless or galvanized cap sized to the flue, with animal guard |
| Flashing repair | $335 – $780 | Resealing or replacing the metal that sheds water where roof meets masonry |
| Tuckpointing and mortar joint repair | $420 – $1,100 | Grinding out soft joints and repacking with proper mortar |
| HeatShield flue resurfacing | $950 – $1,800 | Restoring damaged flue tile to a smooth, sealed surface |
| DuraFlex flexible liner installation | $1,900 – $4,200 | New liner in an offset or hard-to-reach flue, insulated where required |
| Smoke chamber parging | $525 – $1,250 | Rebuilding the transition from firebox to flue |
| Firebox repair (brick, mortar, panels) | $650 – $1,600 | Repointing firebox brick or resetting cracked panels |
| Camera inspection with written findings | $0 – $260 | Free with a repair estimate; standalone video scan quoted separately |
What pushes a Chico job toward the top of a range: a second flue that needs the same repair, a flue with an offset or jog (which we address with DuraFlex), a chimney that needs scaffolding or a roof stand, and anything that uncovers hidden water damage once the mortar comes out. What keeps it near the bottom: a single small crack, a cap that fits off the shelf from Gelco or Famco, and a flue that’s still clean and straight inside.
Caps and covers are worth the line item. In Chico we see a lot of caps that were improvised from sheet metal, and those fail at the seams within a couple of seasons. A fitted Gelco or Famco cap keeps rain and nesting animals out of a flue that would otherwise need a $950-plus liner instead of a $285 cap.
What Affects Chimney Repair Pricing in Chico
Chico has a specific set of conditions that shape chimney work. The valley gets long dry summers, so masonry dries hard and cracks at the crown; then the wet season arrives and water works into those cracks. That’s where most of our repair calls start. Here’s what moves the number:
- Roof access and chimney height. A one-story flue on a clean asphalt-shingle roof is quick work. A tall two-story chimney with a steep pitch or a metal roof adds setup time and safety rigging, both of which show up in the estimate.
- Offset or hard-to-reach flues. A flue that jogs to one side needs a flexible liner, and DuraFlex is what we spec for those. Rigid-liner-only setups can’t follow the jog, which is exactly the situation the right liner for your flue solves.
- Tiles that are cracked but not gone. If the tile is damaged but still structurally present, HeatShield resurfacing can restore the interior surface at roughly half the cost of a full liner tear-out. That’s a repair option most general sweeps can’t offer, and it’s the reason we’re asked about it so often in Chico.
- Water damage up top. A cracked crown or a failing flashing seam lets water into the masonry, and the visible crack is often smaller than the soft mortar underneath. Once we open it up, the scope can grow. We document what we find with photos so you see the same thing we do before we quote the fix.
- Firebox and smoke chamber condition. The firebox takes direct heat, and mortar joints there wear first. A parged smoke chamber and repointed firebox are labor-heavy but worth doing before the burning season starts.
- What kind of appliance you burn. A wood stove calls for a properly sized, insulated liner, and that runs more than a repair on an open fireplace flue that’s already correctly lined. If you’re installing a new stove, the liner is the biggest line on the estimate.
One more factor: us. We work with a curated set of professional-grade brands, DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco, and Copperfield, and we spec to those products’ requirements rather than improvise. That means repair work carries a documented material trail you can keep for your records, which matters to insurers and to anyone who buys the house later. Manufacturer-spec work isn’t always the cheapest line on the market, but it’s the one that holds up after our wet winters.
What a Typical Repair Visit Looks Like
We start with a cleaning and inspection. That’s not upselling; we can’t reliably price a repair we haven’t seen. Our technicians have up to 8 years of experience on both sides of the trade, and part of that training is knowing when a crack is cosmetic and when it’s structural.
From there we document what we find, show you photos, and write up the repair with the products named on the page: HeatShield for flue resurfacing, DuraFlex for liner work, Gelco and Famco for caps and covers, Olympia Chimney and Copperfield for the rest. The written findings and the materials list travel together, so when the work is done you have a paper record of what materials went in and what changed.
Repairs themselves usually run a single visit when the scope is settled. Crown work, caps, and flashing are same-day jobs in most cases. Liner work can run longer depending on height and access. If you’d rather start with a full look at the chimney before talking repair, our Chimney Sweep Chico team books inspection and cleaning the same way.
How to Save on Chimney Repair
A few practical ways to keep the bill down without skipping what matters:
- Fix the crown and cap first. Water is what drives most major chimney repairs in Chico. Stopping it at the top with a repaired crown and a fitted cap is the cheapest insurance against a $2,000-plus liner job later.
- Bundle repairs into one visit. If the crown needs repair and the cap is failing, do both in the same trip. Setup is the most expensive part of any roof-related repair, and one visit is cheaper than two.
- Ask about HeatShield before you commit to a liner. If the flue tiles are damaged but intact, resurfacing can save you real money over a full replacement. Cost: $950 – $1,800 versus a liner at $1,900 – $4,200.
- Book before the burning season. The schedule is tightest as fall approaches, and a chimney that’s caught early spends one wet season instead of two. It’s a timing advantage, not a discount.
- Get the estimate in writing, free. Estimates are free and itemized, and the written estimate sets the final price. Call (844) 320-4731 for a free estimate and we’ll put the number in writing before any work begins.
Repair or Replace?
Repair is almost always the cheaper answer when the tiles are intact and the problem is at the crown, cap, flashing, or firebox. Replacement or relining makes sense when flue tiles are fully cracked through, the liner is missing or wrong-sized for the appliance, or a wood stove is going in and needs an insulated flue that meets its manufacturer’s spec. Our inspection sorts that out. We won’t quote a liner if a HeatShield resurfacing will do the job.
FAQs – Chimney Repair Cost
How much does chimney repair cost in Chico?
Most chimney repairs in Chico run $285 to $1,450, with plenty landing between $400 and $800. Crown, cap, and flashing work sits in the lower part of the range; flue resurfacing and liner work sit higher. Call (844) 320-4731 for a free estimate; the written estimate sets the final price.
Can you fix a cracked chimney crown in one visit?
Yes, most crown repairs run $385 to $950 and finish in a single visit. A small hairline crack can be sealed; a badly deteriorated mortar crown is rebuilt. We document the condition and the fix in writing. Call (844) 320-4731 and we’ll book the inspection first if you haven’t had one this season.
Is HeatShield resurfacing cheaper than a new liner?
Yes, typically about half. HeatShield resurfacing runs $950 to $1,800 versus $1,900 to $4,200 for a new DuraFlex liner. It works when the flue tiles are damaged but still structurally present. If the tiles are gone or the appliance needs a different flue size, the liner is the right call. Call (844) 320-4731 and we’ll tell you which one your flue needs after the inspection.
Can you fix a chimney with an offset flue?
Yes. DuraFlex flexible liner systems are built for offset and hard-to-reach flues, and they cost $1,900 to $4,200 depending on height and access. A rigid-liner-only contractor may turn the job down or improvise; we don’t. Call (844) 320-4731 to schedule an inspection and a written estimate.
How much does a fitted chimney cap cost in Chico?
A fitted cap runs $285 to $625 and is the cheapest repair on the list. We use Gelco and Famco systems sized to the flue, not sheet-metal improvisation, so it stays put through windy days and keeps rain and animals out. Call (844) 320-4731 for a free estimate.
Can I get a chimney repair same day?
Sometimes, yes. Crown, cap, and flashing repairs can often go in the same visit as the inspection if the scope is clear. Liner work may need scheduling based on parts and access. Call (844) 320-4731. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Book a Free Estimate Before the Burning Season
If you’re using a wood fireplace or stove as real heat, or you just want proof your chimney is sound before you strike a match this fall, get the inspection and the written estimate. Estimates are free, upfront, and itemized. Call (844) 320-4731. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed Saturday. Fast response, licensed and insured work, and a satisfaction guarantee on every repair.
Pricing reflects the Chico market as of 2026. Chimney Sweep Chico offers free estimates – call (844) 320-4731.
Written by the team at Chimney Sweep Chico.
What Our Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Claudia Martinez"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jodi Walsh"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Amit Rao