Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Orland, CA
Chimney inspection in Orland is where most of our work starts, and it’s the service we push hardest before the burning season. This town has two very different kinds of chimney under the same sky: older ranch homes and farmhouses with masonry fireplaces and wood inserts that have been drawing smoke for decades, and newer subdivisions with factory-built chimneys that need a different set of checks. Add the Sacramento Valley’s winter inversions and the smell of orchard wood in the air, and a clean, well-drafted flue stops being a maintenance item and becomes part of how the whole town breathes. Call (844) 320-4731 to book a sweep, an inspection, or both.
Why Orland Homes Are Different
Orland sits in the heart of the Sacramento Valley’s almond and walnut country, and that shapes chimney work here in ways you don’t see in most towns. Plenty of households still burn walnut shell and orchard wood alongside split firewood, and those fuels leave creosote and ash loads that behave differently from a diet of seasoned oak alone. When the winter inversion layer settles over the basin, smoke hangs low and doesn’t lift the way it does on an open, breezy day. A fireplace that draws lazily on a mild afternoon can back-puff into the room once the inversion pins the air down.
The housing stock splits the work in two. Older single-story ranch homes and farmhouses often carry masonry fireplaces and wood-burning inserts with years of use on them, so we’re looking at flue tile condition, damper function, and creosote depth. Newer builds more often have factory-built chimneys, which have their own clearances, components and inspection needs. A smoky chimney on a calm Orland morning is a telltale sign of a clogged flue or wet wood, and calls spike after the first cold snap when residents fire up the fireplace for the first time. Getting eyes on the flue before that night is the whole point.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Orland Services
Two services cover the bulk of what Orland homeowners call us about, and they work best as a pair: a documented look at the flue, then a sweep or repair based on what that look turns up.
Chimney Sweep in Orland
A sweep here is a full flue cleaning plus a look at what the creosote load tells us about how you’ve been burning. In the older farmhouses and ranch homes around town, we often find heavy glazed creosote from orchard wood and walnut shell burned hot and slow. We work from the top and the firebox, contain the dust, and leave the firebox and smoke chamber clean. Every sweep comes with a camera inspection and a photo report of what we found, so you’re holding evidence, not a verbal okay. If you want the full rundown, see our Chimney Sweep in Orland page.
Flat-price sweeps are quoted before we book, and the estimate is free. Our technicians have up to 8 years of experience, and the sweep is booked ahead rather than squeezed in, because the urgency here is seasonal: get it done before the inversions set in.

Chimney Repair in Orland
Repair is where the difference between a sweep report and a qualified contractor matters. We can resurface cracked or spalling flue tile with HeatShield rather than tearing out a liner, and we install DuraFlex flexible liners when a flue is offset or hard to reach with rigid pipe. On the older masonry stock scattered through Orland, we see crown cracks, mortar joint erosion, and damaged caps that let rain and animals in. Fitted caps come from Gelco and Famco systems, not improvised sheet metal. The full scope lives on our Chimney Repair in Orland page.
All repair work is tied to manufacturer specifications, which gives you a documented material trail for your records and for insurance purposes. If something can safely wait, we tell you so.

Chimney Inspection in Orland
Chimney inspection in Orland is where we start, and the local conditions make it more than a formality. Homes here split between older masonry fireplaces and inserts that have burned orchard wood for years and newer factory-built chimneys with their own clearances, and the valley’s winter inversions mean a poorly drafting flue shows up fast on a calm morning. A camera inspection tells you which of those two houses you actually have, and what shape it’s in. This is our primary service, and it’s the one that answers the question every homeowner really has: do I need work, and can I see the proof? If you’d like to read the full scope, our Chimney Inspection page covers it end to end.
Chimney Flue Inspection
Signs you need it
Smoke that rolls back into the room, a fireplace that draws poorly on calm, foggy mornings, or a flue you haven’t looked inside in a few seasons.
What it costs in Orland
A basic flue inspection typically runs alongside a sweep, and the camera walk of the flue is included with the sweep; standalone inspections are quoted per job on the written estimate.
How we do it
We run a camera down the flue from the top, check the firebox and smoke chamber, note creosote depth and any tile cracks or offsets, and hand you photo documentation of every finding.
Level 2 Chimney Inspection
Signs you need it
A new home purchase, a chimney that’s changed how it burns, or any repair conversation where you want the full picture before you commit.
What it costs in Orland
A Level 2 inspection is a more thorough scope than a basic sweep, and the price is set per job on the written estimate after we see the flue and the chimney’s exterior components.
How we do it
We inspect the accessible portions of the chimney, including the exterior, the attic and crawl spaces where accessible, the flue interior by camera, and the appliance connections, then document it all in a photo report.
What Chimney Inspection Costs in Orland
| Item | Typical range in Orland |
|---|---|
| Basic flue inspection with sweep | Included with the sweep |
| Standalone camera inspection | Quoted per job by written estimate |
| Level 2 inspection | Quoted per job by written estimate |
We don’t put a fee on the estimate: it’s free, and the written estimate sets the final price before any work begins. The photo report is included either way, so you can see the evidence yourself.
What does a chimney inspection actually cover?
It covers the flue interior by camera, the firebox and smoke chamber, the damper, visible flue tile joints, the crown, cap, and accessible exterior components, all documented with photos. In Orland’s older masonry homes, this is where we catch cracked tile before it becomes a liner job.
Do I need an inspection before the burning season in Orland?
Yes, ideally before the first cold snap when the inversions settle in and everyone fires up the fireplace. That’s when we see the spike in smoking and drafting complaints. Call (844) 320-4731 for a free estimate and get it on the books early.
Brands We Service in Orland
We work with a curated roster of professional-grade chimney brands: DuraFlex flexible liner systems, HeatShield flue resurfacing, and Gelco and Famco cap systems, along with Olympia Chimney and Copperfield. We don’t claim to stock parts locally; repairs and installations reference these brands so you get manufacturer-spec materials with a documented trail. Turnaround depends on the scope and is set at the estimate. See our brands for the full roster.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Orland, CA
Prices here are estimates, not quotes. The written estimate after we see your flue sets the final number.
| Service | Typical range in Orland |
|---|---|
| Chimney sweep | Quoted per job by written estimate |
| Basic flue inspection with sweep | Included with the sweep |
| Standalone camera inspection | Quoted per job by written estimate |
| Level 2 inspection | Quoted per job by written estimate |
| HeatShield flue resurfacing | Quoted per job by written estimate |
| DuraFlex flexible liner installation | Quoted per job by written estimate |
| Gelco or Famco cap and cover | Quoted per job by written estimate |
| Crown and mortar repair | Quoted per job by written estimate |
What pushes price up in Orland is usually the flue itself: offset or hard-to-reach flues need flexible liner work, glazed creosote from orchard wood takes more cleaning, and cracked tile means resurfacing or a liner rather than just a sweep. We give you the upfront price on the written estimate before any work starts, and nothing is recommended without camera evidence you can look at yourself.
Neighborhoods We Serve in Orland
We serve homeowners across Orland, from the older ranch and farmhouse properties on the town’s edges to the newer subdivisions where factory-built chimneys are common. Whether your home is near the walnut orchards or in a newer neighborhood, the same standard applies: camera inspection, photo report, and a written estimate before we touch anything. One scheduling note for the whole town: we book sweeps ahead of the burning season, and dispatch runs Sunday through Friday, 7am to 7pm, closed Saturday. A call outside dispatch hours is booked into the next opening.
- Older ranch and farmhouse properties around Orland
- Newer subdivisions within Orland city limits and ZIP 95963
- Outlying orchard-country homes on the edges of town
Service Area – Cities Near Orland
Orland sits at the center of our valley coverage, and we serve homeowners in the surrounding communities too. If you’re on the north side, our Corning, CA page covers the neighboring area. To the east, we serve Chico, CA and the surrounding valley towns. South of us is Durham, CA, and up toward the ridge we cover Paradise, CA. Wherever you are in that circle, the same inspection-first approach applies: camera evidence, photo report, written estimate.
Serving Orland, CA – Our Local Coverage Area
We serve Orland and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Orland
We book sweeps ahead of the burning season rather than same-day, since the urgency is seasonal. Call and we’ll find you the next opening: we answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Estimates are free.
That depends on the scope and your neighborhood, and we don’t guess at it. Structural repair or a liner install may require a permit; your city’s building department has the answer for your home. We’ll flag anything permit-related at the estimate so you’re not caught off guard.
Yes, we serve Orland and the surrounding valley, from older farmhouse properties on the edges to newer subdivisions. The nearby cities of Corning, Chico, Durham and Paradise are also covered. Call (844) 320-4731 for a free estimate wherever you are.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Orland Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Claudia Martinez"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jodi Walsh"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Amit Rao