Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Chico, CA
Chimney inspection in Chico starts with the same question: where has your chimney been, and what has it been through? This is a wood-burning town, and much of the housing stock is older than the idea of a modern flue liner. The Craftsman and bungalow homes in the older avenues near downtown were built with original brick fireplaces and interior chimneys, while newer subdivisions on the north and east sides run prefab metal fireplaces that take a completely different set of eyes. Add a long burn season and a few winter inversions that trap smoke in the valley, and draft and condition stop being cosmetic concerns. We handle chimney sweeping, chimney repair, and chimney inspection as one integrated job. Call (844) 320-4731.
Why Chico Homes Are Different
Chico’s core is filled with early-1900s to 1950s Craftsman and bungalow homes, and the fireplaces inside them were often built without any modern liner at all. That original brick tolerates a lot, but once flue tile spalls or a joint opens, the chimney stops being safely usable as built. On the north and east sides, newer subdivisions went up with prefab metal fireplaces and factory flues. Those need their own cleaning technique and their own inspection criteria – you can’t treat a factory chimney like a masonry one and get an honest answer.
Then there’s the burn season. Hot, dry summers give way to cool winters, and roughly November through March the fireplace earns its place as a real heat source. Frequent, hot fires build creosote differently than occasional fires do, and the cleaning job reflects that. In the older avenues around downtown, we regularly find “orphaned” chimneys: masonry stacks left behind after a furnace upgrade, now cold and unused, quietly leaking creosote odor into the living space below. Those can’t be used until they’re relined, and figuring out which of Chico’s chimneys fall into that category is exactly what an inspection is for. The wildland-urban interface around Chico adds another layer – after a fire season, homeowners tend to look at their chimney more carefully, and spark arrestor requirements matter more.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Chico Services
Two jobs come up on nearly every call from Chico homeowners: a thorough chimney sweep before the burning season, and chimney repair when the inspection turns up something wrong.
Chimney Sweep in Chico
A proper Chimney Sweep in Chico handles creosote removal differently depending on what’s built into the house. In the older bungalows near downtown, that often means working around irregular original brick fireboxes with tight, offset flues. In the newer subdivisions, it means knowing how to clean a prefab metal firebox and its factory flue without disturbing the components. Because Chico’s fireplaces often run hot and often, we check creosote buildup carefully rather than assuming a standard annual sweep is enough. You get a written account of what we removed and what condition we found it in.

Chimney Repair in Chico
Chimney Repair in Chico tends to fall into a few familiar categories here. Spalling flue tile in old masonry chimneys. Cracked crowns from long hot summers. Caps that have been knocked loose by wildlife or wind. And orphaned stacks that need relining before anyone lights a fire in them again. We work from manufacturer specifications on the parts we use, so a repair isn’t a patch – it’s documented. Chico homes with original brick chimneys benefit most from having a real plan rather than a temporary fix that fails the following season.

Chimney Inspection in Chico
Chimney Inspection in Chico is where every other decision gets made. The older Craftsman and bungalow homes in the core were built with interior brick chimneys and original fireplaces that frequently lack a modern liner, so there’s no way to know what’s safe from the outside looking up. Add a long burn season and a few winter inversions that push smoke down into the valley, and the condition of the flue stops being cosmetic. A proper Chimney Inspection gives you documented, written findings you can actually act on, and we’re careful to describe exactly what we observed rather than handing you a verbal okay.
Chimney Inspection Services
A full inspection covers the firebox, damper, smoke chamber, flue, crown, cap, and exterior stack. It’s the right starting point for a Chico home that hasn’t had its chimney looked at in a while.
Signs you need it
You need an inspection if you’ve never had the chimney examined, if it’s been more than a year since a sweep, or if the home was recently purchased and the chimney’s history is unknown.
What it costs in Chico
An inspection typically runs $150 to $350 depending on level and access, and we set the final figure in a written estimate before any work begins.
How we do it
We examine the firebox, damper, smoke chamber, flue, crown, cap, and exterior stack, photograph what we find, and give you written findings in plain language.
Level 2 Chimney Inspection
A Level 2 inspection goes deeper, using a camera to see the interior surfaces of the flue that a visual check from below can’t reach. It’s the right level for a real estate transaction, after a chimney fire, or after any change to the appliance or fuel type.
Signs you need it
You need a Level 2 inspection when a home is being sold, after a chimney fire has occurred, or when the heating appliance or fuel type has changed.
What it costs in Chico
A Level 2 inspection typically ranges from $250 to $500 in Chico, and a written estimate fixes the final price before we start.
How we do it
We run a camera through the flue to document interior flue tile and joints, then record the findings with photos so you have a clear picture of what’s there.
What Chimney Inspection Costs in Chico
| Item | Typical range in Chico |
|---|---|
| Standard chimney inspection | $150 – $350 |
| Level 2 inspection with camera | $250 – $500 |
| Inspection combined with a sweep | $180 – $400 |
How often should a Chico chimney be inspected?
Once a year, and any time you notice a change in how the fireplace burns, smells, or drafts. In a town where fireplaces run hard from November through March, an annual inspection catches problems before they cost real money.
Is a Level 2 inspection always necessary?
No. A Level 1 inspection is usually enough for a chimney in steady use with no changes. We recommend a Level 2 when you’re buying or selling a home, or after a chimney fire or appliance change.
Brands We Service in Chico
We work with professional-grade chimney systems rather than generic hardware: DuraFlex flexible liners for offset and hard-to-reach flues, HeatShield for flue resurfacing, and Gelco and Famco for fitted caps and animal exclusion. Using manufacturer-spec parts means your repair comes with a documented material trail. See our brands for the full list, and note that special-order components can extend turnaround beyond a same-week repair.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Chico, CA
| Service | Typical range in Chico |
|---|---|
| Standard chimney inspection | $150 – $350 |
| Level 2 inspection with camera | $250 – $500 |
| Inspection plus chimney sweep | $180 – $400 |
| Annual chimney sweep (standard masonry flue) | $150 – $300 |
| Chimney sweep (prefab metal flue) | $150 – $275 |
| Chimney cap installation (Gelco or Famco) | $150 – $350 |
| Crown repair or rebuild | $300 – $800 |
| Flue tile resurfacing (HeatShield) | $1,000 – $2,500 |
| Flexible liner installation (DuraFlex) | $1,800 – $4,500 |
| Minor masonry crack repair | $200 – $600 |
In Chico, price pushes up when access is difficult – offsets in old interior chimneys, tight attic penetrations, or a stack that needs scaffolding. Prefab fireplaces are usually less to service than full masonry. Every job gets a written estimate with the number fixed before we start, so the figure on paper is the figure you pay.
Neighborhoods We Serve in Chico
We work across the older core, where original brick fireplaces and interior chimneys are the norm, and out to the newer subdivisions on the north and east sides, where prefab metal fireplaces need different handling. Orphaned masonry stacks left after furnace upgrades show up often in the older avenues, and those need relining before anyone lights a fire in them. Wherever you are in the area, we’ll schedule the visit and book out from there.
- Downtown and the older avenues
- The south and central bungalow neighborhoods
- North Chico subdivisions
- East Chico and the newer residential edges
- The outlying areas toward the wildland-urban interface
Service Area – Cities Near Chico
Chico sits at the center of a wide service area, and we handle chimney cleaning, inspection, and repair for homeowners across the surrounding communities. If you’re in Durham, CA or out toward the almond country, we cover it. Same for Paradise, CA up in the hills, Magalia, CA further up the ridge, and Orland, CA to the west along the valley floor. Book a visit and we’ll confirm the scheduling details for your address.
Serving Chico, CA – Our Local Coverage Area
We serve Chico and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Chico
Yes, Chico is our primary service area, and we also cover the communities around it including Durham, Paradise, Magalia, and Orland. Call (844) 320-4731 to confirm details for your specific address and we’ll book a visit.
Some structural chimney work requires a permit from the city, and it depends on the specific scope. We’ll tell you what applies to your project during the inspection and written estimate, so you’re not guessing about paperwork before the work starts.
Schedule before the burn season starts in roughly November. Chico fireplaces run hard from November through March, so an inspection and sweep in early fall catches problems while there’s still time to complete any repair work before you need the fireplace for heat.
If you’re ready to know what’s really going on inside your chimney, call (844) 320-4731 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 8 years of experience, and we document what we find so you have a written record of the inspection and any repair work.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chico Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Claudia Martinez"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jodi Walsh"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Amit Rao