Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Corning, CA
Chimney inspection in Corning is mostly about proving what’s actually going on inside a flue that sat unused for months. This is an almond-and-walnut town in the Sacramento Valley where wood heat is a backup for fog-season power outages rather than a primary fuel, so most chimneys here are neglected rather than heavily used. That changes what we look for. We’re Chimney Sweep Chico, and we come out to Corning to inspect, sweep, and repair – not to sell you a rebuild. Call (844) 320-4731 to book an inspection.
Why Corning Homes Are Different
Walk the old downtown grid off Solano Street and you’ll see mostly early- to mid-1900s wood-frame bungalows and cottages. Many still have their original brick fireboxes and clay-tile liners, sized for fireboxes that were built smaller than what people expect today. Those liners were never meant for modern hot burns, and after decades of on-and-off use the tile joints can open up while the mortar around the crown spalls.
Out past town it’s a different job entirely. Ranch properties out in Tehama County often run on propane and wood, and there a chimney is the only heat source, so the stakes are higher and the equipment differs – factory-built metal flues get brushed and inspected differently than masonry stacks.
The climate does its own work on these chimneys. Tule fog and wet winters keep flues cold and damp for weeks at a stretch, which encourages creosote to glaze and mortar to soften. Then hot, dry summers and nearby wildland grass fires make a sound chimney the last line of defense against sparks when fall burn season arrives. Late-fall calls spike here the moment the first cold snap follows the first rain and long-idle flues push smoke back into the house. Often that’s a fog-dampened clay liner or a bird or squirrel nest packed into the cap – not a chimney that needs sweeping.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Corning Services
Two services cover the great majority of what Corning homeowners call us about, though our work here is centered on inspection.
Chimney Sweep in Corning
For most Corning properties, a sweep is about clearing what accumulated while the firebox sat idle: nests, leaf litter, and fog-damp soot rather than heavy creosote. We brush the flue, check the smoke chamber and damper, clear the firebox, and bag the debris so nothing ends up in your living room. Factory-built metal flues on the ranch properties outside town get a different brush and a different inspection routine than the clay-tile stacks on the bungalows off Solano Street. For the full rundown, see Chimney Sweep in Corning.

Chimney Repair in Corning
Repair in Corning usually falls into two buckets: masonry that’s aged out and crowns or caps that have failed. Older brick fireboxes with clay-tile liners often need resurfacing rather than a full tear-out, and HeatShield lets us restore damaged flue tile from the inside. Where a flue is offset or hard to reach, a DuraFlex flexible liner means we install the right liner for your flue instead of forcing a rigid one. Caps get replaced with fitted Gelco or Famco systems so weather and animals stay out. Details on Chimney Repair in Corning.

Chimney Inspection in Corning
Chimney inspection in Corning is the service that makes everything else make sense. On bungalows with original brick fireboxes and clay-tile liners, and on ranch houses where wood is the only heat, an inspection is how we document the true condition of the flue before anyone lights a fire. We’re Chimney Sweep Chico, and our Chimney Inspection walks the whole system – firebox, damper, smoke chamber, flue, crown, and cap – so there’s a written record instead of a verbal guess. Our technicians have up to 8 years of experience with masonry stacks and factory-built flues alike.
Fireplace Inspection
Signs you need it
You need a fireplace inspection if your firebox has sat unused through several winters, if smoke rolls into the room when you first light a fire, or if you’ve never had the firebox looked at since moving in.
What it costs in Corning
A fireplace inspection typically runs $125 to $225, and a written report with photos comes with it.
How we do it
We examine the firebox brick and mortar joints, the damper operation, the smoke chamber, and the firebox-to-flue transition, then photograph what we find and hand you the report.
Level 2 Chimney Inspection
Signs you need it
You need a Level 2 inspection if you’re buying a Corning home, if you’ve changed fuels or appliance type, or if a prior sweep flagged something the naked eye couldn’t confirm.
What it costs in Corning
A Level 2 inspection typically runs $225 to $350, higher when a camera run covers an offset or long flue.
How we do it
We send a camera through the full flue, inspect the crown, cap, and any offsets, and record the findings so you have documentation for your own records or for your insurer.
What Chimney Inspection Costs in Corning
| Item | Typical range in Corning |
|---|---|
| Fireplace inspection | $125 – $225 |
| Standard chimney inspection | $150 – $275 |
| Level 2 inspection with camera | $225 – $350 |
What happens if I skip a chimney inspection in Corning?
Skipping it means fog-dampened liners, opened tile joints, and animal nests go unseen until they cause smoke backup or a chimney fire. A small inspection now is cheaper than masonry repair later.
Can a Corning inspection tell me whether I can keep burning wood?
Yes. The inspection report states plainly whether the flue is sound enough to burn, what needs repair, and what can safely wait. No verbal guesswork.
Brands We Service in Corning
Repairs and installations use professional-grade product lines: DuraFlex liners, HeatShield resurfacing, Olympia Chimney components, and Gelco or Famco caps. We don’t claim to stock every part locally; if a component isn’t on hand it gets sourced against the manufacturer’s spec. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Corning, CA
Every figure below is a typical estimate, not a quote. What pushes price up in Corning: offsets and long flues that take longer to camera-inspect or re-line, offsets on older bungalows where the flue path isn’t straight, and reach on ranch properties outside town. The written estimate sets the final price and you get it upfront before any work begins.
| Service | Typical range in Corning |
|---|---|
| Fireplace inspection | $125 – $225 |
| Standard chimney inspection | $150 – $275 |
| Level 2 inspection with camera | $225 – $350 |
| Chimney sweep | $175 – $325 |
| Chimney cap installation | $200 – $450 |
| Crown repair | $350 – $900 |
| HeatShield flue resurfacing | $1,400 – $3,800 |
| DuraFlex flexible liner installation | $2,600 – $6,500 |
| Masonry repair | $400 – $1,800 |
Neighborhoods We Serve in Corning
We work throughout Corning and out into the surrounding Tehama County ranch land. Response is scheduled per job; a call outside dispatch hours gets booked into the next opening, Sunday through Friday, 7am to 7pm.
- The downtown grid off Solano Street, where the older bungalows and cottages sit
- In-town properties along the older residential blocks near downtown
- Ranch properties and rural homes on propane and wood in surrounding Tehama County
- Outlying properties on well and septic with factory-built or metal flues
- Mobile home sites throughout the Corning area
Service Area – Cities Near Corning
Corning sits in the northern Sacramento Valley, and we work the surrounding cities as well: Orland, CA, Chico, CA, Durham, CA, and Magalia, CA. Each has its own housing mix and fire-history pattern, and we schedule work per city with the same inspection, sweep, and repair approach we bring to Corning.
Serving Corning, CA – Our Local Coverage Area
We serve Corning and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Corning
Call (844) 320-4731 and tell us the property type – in-town bungalow, ranch house, or mobile home. We’ll book an inspection slot and confirm the address. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Permit requirements for chimney repairs vary by scope and structure type in Tehama County. Ask your city’s building department before work begins, and we can discuss what the repair involves so you know what to ask about.
Yes. Our Corning service area stretches out into surrounding Tehama County ranch land on propane and wood, where the inspection matters most because the chimney is often the only heat source. Call (844) 320-4731 for availability at your address.
Chimney problems in Corning are usually quieter than people expect: a fog-dampened liner, a nest in the cap, a crown that cracked over one dry summer. The fix is a documented inspection and a straight answer about what needs doing now and what can wait. We work with DuraFlex, HeatShield, Olympia Chimney, Gelco, and Famco products so repair work matches manufacturer specs and you have a paper trail for insurance. Call (844) 320-4731 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Corning Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Claudia Martinez"Thorough sweep and a clear report. He was running late from the job before and arrived near the end of the window, though he did call to warn me."
- Jodi Walsh"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Amit Rao